Ad Space — Top Banner

6E

Samsung Washing Machine

Severity: Moderate

What Does This Error Mean?

The 6E error means your Samsung washer has a problem with the water heating element. The water is not reaching the correct temperature. This usually stops cycles that require hot water.

Affected Models

  • WF45R6100AW
  • WF50R8500AV
  • WF45T6000AW
  • Most Samsung front-load washers

Common Causes

  • Faulty or burned-out heating element
  • Defective thermistor (temperature sensor)
  • Loose wiring connection to the heater
  • Water temperature too cold entering the machine
  • Damaged main control board not reading the heater correctly

How to Fix It

  1. Unplug the washer and wait 60 seconds.

    This resets the electronics. Plug back in and retry the cycle.

  2. Make sure the hot water supply to the machine is turned on.

    Check the hot water inlet valve at the back of the washer.

  3. Run a short cycle and check if water feels warm during the wash.

    If the water is always cold, the heater is likely the problem.

  4. Check the wiring connections at the heating element.

    A loose connector can cause this error. Only do this if you're comfortable with appliance repairs.

  5. If the heater or thermistor is confirmed faulty, replace the part.

    Contact Samsung support or a certified technician for this repair.

When to Call a Professional

Replacing a heating element or thermistor involves working near electrical components. It's best handled by a qualified appliance technician. Repair costs typically range from $150–$350 including parts and labor.

Frequently Asked Questions

Can I still use my Samsung washer with the 6E error?

You may be able to run cold-water cycles. Hot water cycles will fail or not heat properly. Get the heater checked before continuing regular use.

How do I know if my Samsung washer heater is faulty?

The water will stay cold even on a hot wash setting. The 6E code appears consistently. A technician can test the heating element with a multimeter.

How much does a Samsung washer heater replacement cost?

Parts alone cost around $50–$120 depending on the model. With labor, expect $150–$350 total. Always confirm the diagnosis before ordering parts.