F25
Whirlpool Washing Machine
Severity: ModerateWhat Does This Error Mean?
The F25 error means your Whirlpool washer has a drive motor temperature fault. The motor has overheated or the thermal fuse has blown. The washer stops to protect the motor from damage.
Affected Models
- WFW5620HW
- WFW6620HW
- WFW9620HC
- Most Whirlpool Duet front-load washers
Common Causes
- Motor overheated from running too many consecutive cycles
- Blown thermal fuse in the motor circuit
- Drum is overloaded making the motor work too hard
- Motor winding failure causing the motor to run hot
- Wiring fault in the motor harness causing electrical resistance
How to Fix It
-
Turn off the washer and unplug it.
Let the machine rest for at least 30–60 minutes to let the motor cool down.
-
Check that the drum is not overloaded.
A drum packed too tight makes the motor strain. Remove some items if the load is heavy.
-
Plug the washer back in and try a small test load.
If F25 clears and the cycle runs, the motor overheated from overloading.
-
If F25 returns immediately, a component has failed.
The thermal fuse or motor winding needs professional testing.
-
Contact Whirlpool support or a certified technician.
A blown thermal fuse cannot be reset — it must be physically replaced.
When to Call a Professional
Motor repairs and thermal fuse replacement require professional tools. A blown thermal fuse means the motor overheated — the root cause must also be found. Repair costs are typically $150–$350 including parts and labor. Contact Whirlpool support or a licensed technician.
Frequently Asked Questions
Can I prevent the F25 error on my Whirlpool washer?
Yes — avoid overloading the drum. Also avoid running many back-to-back heavy cycles. Let the machine rest for 30 minutes between very large loads.
What is a thermal fuse and why does it blow?
A thermal fuse is a one-time safety device. It cuts power to protect the motor if it gets too hot. Once blown, it cannot be reset — it must be replaced.
How much does it cost to fix a Whirlpool washer F25 error?
If only the thermal fuse is blown, repair costs $80–$180. If the motor is damaged, expect $200–$400 with labor. Always diagnose the root cause of the overheating.