Electrolux Dryer E61 Error — Heating Element Failure

What it means

E61 means the heating element has failed and is no longer producing heat.
The dryer will tumble but clothes will not dry.
Clean the vent first, then replace the element.

Affected Models

Electrolux Electric Dryer
Electrolux EDC Series
Electrolux EW Series
Electrolux Condenser Dryer

Common Causes

Failed heating element coil
Open thermal limiter on the element circuit
Blocked exhaust vent accelerating element failure
Loose wiring connection to the element

How to Fix It

Clean the exhaust vent and lint filter.

Clear all lint from the filter and the full exhaust duct run.
A blocked vent causes chronic overheating that burns out heating elements prematurely.
Test the thermal limiter.

Locate the thermal limiter on the heating element assembly and test it with a multimeter.
No continuity means the limiter has opened.
Replace it — do not bypass it.
Test and replace the heating element.

If the thermal limiter is intact, test the heating coil for continuity.
No continuity means the coil has failed.
Replace the element assembly with the correct part for your Electrolux model.

When to Call a Professional

If the thermal limiter is intact and the element coil tests open, this is a straightforward part replacement.
A technician is recommended if the problem returns after replacing the element.

Frequently Asked Questions

Can I run an Electrolux dryer with an E61 error to finish a load?

The dryer will tumble but produce no heat, so clothes will not dry. Running it further will not damage the machine, but it is pointless until the element is replaced.

How long does it take to replace an Electrolux dryer heating element?

For a confident DIYer, expect 1–2 hours. The heating element is accessed from the back panel on most Electrolux models.