Husqvarna Automower Error 001 — Blade Motor Blocked

What it means

Error 001 means the blade motor stalled due to an obstruction.
Turn the mower over, remove debris from the blade disc, and restart.

How to Fix It

Switch off and disconnect

Press STOP on the mower and remove it from the charging station before touching the blade area.
Turn the mower over

Lay the Automower on its back on a flat surface.
Never reach under the cutting deck while the mower is powered on.
Clear the blade disc

Remove any grass clumps, sticks, leaves, or debris wrapped around the blade disc and blade holders.
Spin the disc by hand

Rotate the blade disc manually.
It should spin freely.
Resistance or grinding indicates a damaged blade or worn bearing.
Check blade bolts

Ensure all three blade holders and bolts are tight and none of the blades are bent or missing.
Restart the mower

Place the mower back on the ground, press START, and monitor for recurrence.
Repeated Error 001 may mean the blade motor needs replacement.

Frequently Asked Questions

What causes Error 001 on Husqvarna Automower?

Error 001 triggers when the blade motor detects too much resistance.
Common causes include thick or wet grass, a stick caught under the deck, or worn blade holders.

How do I reset Error 001?

After clearing the blockage, press OK or START on the keypad.
The error clears automatically once the mower confirms the blade motor is running freely.

Can Error 001 damage the mower?

Repeated Error 001 faults can wear out the blade motor over time.
Replace blades regularly and avoid mowing in very wet or overgrown conditions.